You are here:   Home  >  Crosby Hardware   >  Alloy Shackles

Crosby Web Sling Saver Shackles 

"WIDE BODY" SLING SAVER SHACKLES INCREASE SLING LIFE

NOTICE: All shackles are magnetic particle inspected.

G-2160


    

• Greatly improves wearability of wire rope slings.
• Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
• Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.
• Increases usable sling strength minimum of 15%.
• Pin is non-rotating, with weld on handles for easier use.
• All ratings are in metric tons, embossed on side of bow.
• Forged alloy steel from 30 through 300 metric tons.
• Cast alloy steel from 400 through 1000 metric tons.
• Sizes 400 tons and larger are tested to 1.33 times Working Load Limit.
• Sizes 300 tons and smaller are proof tested to 2 times the Working Load Limit.
• All 2160 shackles are individually proof tested, Crosby certification available at time of order. Shackles requiring ABS, DNV, Lloyd's and other certifications are available upon special request and must be specified at time of order.
• Shackles are produced in accordance with certified lifting appliance requirements.
• Non Destructive Testing
• Serialization / Identification
• Material Testing (Physical / Chemical / Charpy)
• Proof Testing
• All sizes Quenched and Tempered for maximum strength.
• Bows and pins are furnished Dimetcoted.
• All Pins are Dimetcoted then painted red.
• Type Approval and certification in accordance with DNV Specification 2.7-1 Offshore Containers and DNV rules for Lifting Appliances -Loose Gear.

* Ultimate Load is 5 times the Working Load Limit.
† Forged Alloy Steel. Proof load is 2 times the Working Load Limit.
†† Cast Alloy Steel. Proof load is 1.33 times the Working Load Limit.

Crosby Web Sling Saver Shackles