BC Wire Rope & Rigging

Customer Application Questionnaire

Please answer the following to the best of your ability so that we can accurately provide you with a system that best suits your job requirements.


	First Name	Last Name

	Company Name	email


	What are your wire rope diameters and lengths?

	What is the number of outer strands for each diameter and direction of lay? Example: 3/4" (19mm) 6-strand right hand lay. Please also note if they are lang lay or long lay if you have that information as well.

	What is the maximum and minimum wire rope travel speed for each rope?

	Describe the kind of work application each rope is being used for. Example: Crane Boom Hoist, Crane Load Line, Mine Vertical Hoist, Mooring Line.

	How heavily coated is each wire rope from old coatings that have been applied or environmental contaminants. (This helps us determine whether Groove Cleaners will be beneficial). New wire ropes do not initially require the use of Groove Cleaners.

	What is your wire rope condition? Example: burrs, broken strands, rough with surface rust, smooth with no broken strands.

	How has your wire rope maintenance been performed up to this point? Example: By Hand, Spray, or Vat. Etc.

	How often?

	How far will your work location be from your air source?

	What length and what diameter is your air line?

	What is the Trade Name of your current lubrication?

	What has been the viscosity of the wire rope coating you have been applying to this point? Example: Liquid, Molasses consistency, Gel, Peanut Butter consistency or soft grease.

	What is the temperature range in your working environment during your wire rope maintenance procedure?

Air Supply Required:

Larger diameter (2" (51mm) and larger) 6-strand, 7-strand, 8-strand wire rope configurations require one of our Jumbo Systems. The air supply should therefore be at least 30 to 40 CFM for them to perform optimally. Most Plant or Shipboard air is adequate to run the Jumbo System Pump packages.
Standard Systems (Wire rope diameters to 1-7/8" (48mm) can function with compressors of 15 CFM or stronger capacity. Much depends on the wire rope travel speed that exists during the wire rope maintenance process.